Unveiling the Secrets of Packet Travel: The Ultimate Tutorial for Executing Tracert in Windows Environments

What to Know

• The tracert command details the path a packet takes from your computer to the destination you specify.
• For example, entertracert google.com into Command Prompt. IP addresses work, too:tracert 192.168.1.1 .

This article details how to use the Windows tracertcommand . It includes all the switches that work with tracert and some examples that show how to write it. You might sometimes see this command referred to as_trace route_ or_traceroute_ ; it’s all the same command.

Tracert Command Syntax

If you knowhow to read command syntax , the syntax for tracert is pretty straightforward:

tracert [-d ] [-h MaxHops ] [-w TimeOut ] [-4 ] [-6 ]target [/? ]

The availability of certain tracert command switches and other tracert commandsyntax may differ from operating system to operating system. Tracert, as it’s explained below, applies to Windows only, but the command is also available for Linux.

Other less commonly used options for the tracert command also exist, including [-j HostList ], [-R ], and [-S SourceAddress ]. Use the help switch with the Windows tracert command for more information on these options.

Save the lengthy results of a tracert command byredirecting the command output to a file with aredirection operator .

Tracert Command Examples

Here are some examples of the various ways you might use this command:

Tracert to a Router

tracert 192.168.1.1

In the above example, the tracert command is used to show the path from the networked computer on which the tracert command is being executed by a network device, in this case, a router on a local network, that’s assigned the 192.168.1.1 IP address.

The result displayed on the screen will look something like this:

Tracing route to 192.168.1.1 over a maximum of 30 hops
1 <1 ms <1 ms <1 ms 192.168.1.254
2 <1 ms <1 ms <1 ms 192.168.1.1
Trace complete.

In this example, you can see that tracert found a network device using the IP address of 192.168.1.254 , let’s say a network switch, followed by the destination, 192.168.1.1 , the router.

How to Tell What Devices Are on Your Network

Tracert to a Website

tracert www.google.com

With the tracert command shown above, we’re asking tracert to show us the path from the local computer all the way to the network device with the hostname <www.google.com> .

Tracing route to www.l.google.com [209.85.225.104]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 10.1.0.1
2 35 ms 19 ms 29 ms 98.245.140.1
3 11 ms 27 ms 9 ms te-0-3.dnv.comcast.net [68.85.105.201]
...
13 81 ms 76 ms 75 ms 209.85.241.37
14 84 ms 91 ms 87 ms 209.85.248.102
15 76 ms 112 ms 76 ms iy-f104.1e100.net [209.85.225.104]
Trace complete.

In this example, we can see that tracert identified fifteen network devices including our router at 10.1.0.1 and all the way through to the target of <www.google.com> , which we now know uses the public IP address of 209.85.225.104 , one of Google’s many IP addresses.

Hops 4 through 12 were excluded above just to keep the example simple. If you were executing a real tracert, those results would all show up on screen.

OtsAV DJ Pro

Tracert Without Resolving Hostnames

tracert -d www.yahoo.com

With this tracert command example, we’re again requesting the path to a website, this time <www.yahoo.com> , but now we’re preventing tracert from resolving hostnames by using the -d option.

Tracing route to any-fp.wa1.b.yahoo.com [209.191.122.70]
over a maximum of 30 hops:
1 <1 ms <1 ms <1 ms 10.1.0.1
2 29 ms 23 ms 20 ms 98.245.140.1
3 9 ms 16 ms 14 ms 68.85.105.201
...
13 98 ms 77 ms 79 ms 209.191.78.131
14 80 ms 88 ms 89 ms 68.142.193.11
15 77 ms 79 ms 78 ms 209.191.122.70
Trace complete.

We can see that tracert again identified fifteen network devices including our router at 10.1.0.1 and through to the target of <www.yahoo.com> , which we can assume uses the public IP address of 209.191.122.70 .

As you can see, tracert didn’t resolve any hostnames this time, which significantly sped up the process.

Save Tracert Results to a File

tracert -h 3 lifewire.com > z:\tracertresults.txt

In this last example of the tracert command in Windows, we’re using -h to limit the hop count to 3 , but instead of displaying the results in Command Prompt, we’ll use the > redirection operator to send it all to a TXT file located on Z: , an external hard drive.

21 Best Command Prompt Tricks

Here are some example results of this last command:

Tracing route to lifewire.com [151.101.66.114]
over a maximum of 3 hops:
1  <1 ms  <1 ms  <1 ms testwifi.here [192.168.86.1]
2   1 ms   1 ms  <1 ms 192.168.1.1
3  17 ms  16 ms  17 ms giantwls-64-71-222-1.giantcomm.net [64.71.222.1]
Trace complete.

Tracert Command Availability

The tracert command is available from within the Command Prompt in all Windows operating systems including Windows 11, Windows 10, Windows 8, Windows 7, Windows Vista, Windows XP, and older versions of Windows as well.

Epubor Audible Converter for Win： Download and convert Audible AAXC/AA/AAX to MP3 with 100% original quality preserved.

Tracert Related Commands

The tracert command is often used with other networking-related Command Prompt commands like ping,ipconfig , netstat,nslookup , and others. The pathping command is similar to tracert but also shows network latency and loss information.

The Complete List of Command Prompt (CMD) Commands

Was this page helpful?

Thanks for letting us know!

Get the Latest Tech News Delivered Every Day

Subscribe

Tell us why!

Other Not enough details Hard to understand

Submit